Room & Rug

North Carolina State University carpet sizes and room-planning worksheet

The NCS-BEI selection distinguishes 7 × 12 ft and 10 × 12 ft rectangles. Their shared 12 ft side makes the 3 ft difference in width the main layout comparison.

Compare the nominal rectangles

A 7 × 12 ft rectangle covers 84 sq ft; 10 × 12 covers 120 sq ft, a difference of 36 sq ft. If your usable rectangle is narrower than 10 ft, the wider label cannot fit in that orientation simply because the length matches. Try both orientations against actual clear measurements and door swings.

NCS size options recorded 2014-07-14
LabelCalculated areaCalculated metric sides
7 × 12 ft84 sq ft2.13 × 3.66 m
10 × 12 ft120 sq ft3.05 × 3.66 m

Area is width multiplied by length. Metric sides use 0.3048 metres per foot, rounded to two decimals. These are calculations from nominal labels, not measured finished dimensions. Prices are omitted.

Read the room qualifiers

The 14 July 2014 notes distinguish Lee A & D from Lee B & C, and Sullivan A & D from Sullivan B & C. Avent Ferry C–F and North include a “Carpeted” qualifier. Those subdivisions and qualifiers matter more than a hall name alone. The table reproduces dated recommendation labels, not today’s hall plans.

North Carolina State University carpet notes recorded 2014-07-14 — not current hall specifications
Room label in the dated listRecommendation label (feet)
Alexander10 x 12
Avent Ferry (Rooms/Fl = A & B)10 x 12
Avent Ferry (Rooms/Fl = C - F)10 x 12 (Carpeted)
Bagwell7 x 12
Becton7 x 12
Berry7 x 12
Bowen7 x 12
Bragaw10 x 12
Carroll-7 x 12
Gold10 x 12
Lee A & D10 x 12
Lee B & C7 x 12
Metcalf-7 x 12
North-10 x 12 (Carpeted)
Owen-10 x 12
Sullivan A & D10 x 12
Sullivan B & C7 x 12
Syme7 x 12
syme rooms 216A, 215-A, 316-A, 315A7 x 12
Tucker10 x 12
Turlington10 x 12
Watauga double10 x 12
Watuga single7 x 12
Welch10 x 12
Wood B7 x 12
Wood C10 x 12
Wood D10 x 12
Wood E10 x 12
Wood F10 x 12
Wood G10 x 12
Wood H10 x 12
Wood J7 x 12

Keep colour and size checks separate

Colour selector recorded 2014-07-14 for NCS-BEI
Selection identifierColour label
NCS-LBLLight Blue
NCS-GRYGray
NCS-BEIBeige
NCS-NAVNavy
NCS-BLKBlack

Compare a physical colour sample against the furniture, bedding and lighting in the room. A colour label gives no fibre, backing or care specification. The size options above belong to the identified source selection; they are not assigned to missing individual colour pages.

Additional dated selector labels
Selection identifierAdditional colour labelEvidence date
NCS-BURBurgundy2013-06-23
NCS-HUNGreen2013-06-23

Worksheet for your own room

A planning worksheet; enter actual measurements
RecordYour check
Usable rectangleMeasure both clear sides after fixed furniture and required access are marked.
OrientationDraw each nominal rectangle in both directions. Check the actual finished dimensions of the rug you intend to use.
Doors and furnitureMark door swings, desk-chair movement and the route from bed to exit before choosing coverage.
Existing flooringInspect what is already on the floor and check the present housing rules for any covering or attachment.
Colour and removalCompare a physical sample, then plan how the actual item will be moved and stored.

Related planning guides

Using the programme as a colour-selection alternative

The colour selector above keeps the exact identifiers and labels from this programme together. If you arrived from an individual colour address, use it to identify that selection and compare the programme’s planning questions. This is a programme-level alternative; it does not recover the missing colour card or establish an exact replacement.

Compare a physical sample with the room’s floor, furniture and lighting. Then obtain finished dimensions, backing and care information for the exact selection. Keep those questions separate from the nominal sizes and dated room notes on this page, which remain tied to their own source selection.